Detection & Measurement System News

Detecting Early Process Breakthrough in Heat Exchangers

Detecting Early Process Breakthrough in Heat Exchangers
Heat exchangers are used throughout many industrial plants to cool and convert steam into condensate. Condensate contamination is very costly and affects efficient operation of the plant, or even worse, the contamination can cause environmental pollution. Monitoring the conductivity of the condensate leaving the heat exchanger is a reliable method ...
Continue reading
  103 Hits
  0 Comments

The RIGHT Location For Your Gas Detector Is Not As Obvious As It Seems

The RIGHT Location For Your Gas Detector Is Not As Obvious As It Seems
Jim McGlone, the Technical Consultant for process safety, fire and gas detector coverage at Kenexis, told us a story about a plant visit with a customer where a hydrocarbon gas release occurred from a 4,000 psi compressor. A high pressure gas jet stream was blowing a couple of feet directly over their Honeywell Analytics Searchpoint Optima Plus poi...
Continue reading
  2053 Hits
  0 Comments

How Often Should You Review Your Flame Monitoring Setup?

How Often Should You Review Your Flame Monitoring Setup?
Honeywell's Mike Madzy on Industrial Flame Monitoring Technology We sat down with Mike Madzy, Application Specialist at Honeywell Thermal Solutions, to ask him about his role with the company and about Honeywell's Industrial Flame Monitoring solutions. How long have you been in the industry and what are some special applications you've overseen? Fo...
Continue reading
  141 Hits
  0 Comments

Environmental Compliance in Wastewater Applications

Environmental Compliance in Wastewater Applications
Do you know the three key ways to prevent wastewater breakthroughs that cause contamination and pollution causing fines? pH - Monitoring pH is critical. Very low pH liquids can damage parts of the treatment system and potentially kill the good bacteria in the clarifier. Knowing in advance that low pH liquid is entering the process allows the operat...
Continue reading
  1247 Hits
  0 Comments

Honeywell Industrial Flame Monitoring (IFM) for Heated Process Applications

Honeywell Industrial Flame Monitoring (IFM) for Heated Process Applications
Honeywell IFM products are tailor-made for the unique demands of industrial heated processes and are designed for the highest level of function and flame discrimination. They can be configured and diagnostics monitored remotely across multiple sensor options which makes them highly flexible in the field.  DMS is maintaining over $200,000 in in...
Continue reading
  2095 Hits
  0 Comments

Blackline Safety Increases Worker Safety with Real-Time Monitoring and Gas Detection

Blackline Safety Increases Worker Safety with Real-Time Monitoring and Gas Detection
Now Personal Gas Detectors Do More Than Just "BEEP"! A Personal Safety Monitor for Portable Gas Detection and Worker Safety Real-Time Gas Detection Notifications:24/7 Wireless Monitored DeviceHigh and low gas alerts with GPS location for emergency responseTime-weighted average (TWA) & Short-term exposure limits (STEL)Bump, calibration info...
Continue reading
  6404 Hits
  0 Comments

pH Water Treatment Tip from the Field

tips-from-the-field-DMS
There's a very tricky pH water treatment measurement that many people seem to struggle with. It's the kind of headache we commonly see in the field, but may not have been exposed to before now. In Tips from the Field, DMS shares unusual problems and how they were resolved.  We enjoy tackling unique issues in the field and always welcome the ch...
Continue reading
  4729 Hits
  0 Comments

NEW "Best in Class" 1,082' Path Length Open Path IR Hydrocarbon Detector from Honeywell Analytics

NEW "Best in Class" 1,082' Path Length Open Path IR Hydrocarbon Detector from Honeywell Analytics
The Searchline Excel Plus and Edge from Honeywell Honeywell Analytics is launching the new Searchline Excel Plus/Edge infrared hydrocarbon detector on September 1st, 2021, which is a VERY significant performance evolution for open path infrared hydrocarbon detectors in the gas detection industry.  Here is the Detection & Measurement System...
Continue reading
  2431 Hits
  0 Comments

Servomex Solutions for Gas Detection and Monitoring Applications

Servomex Solutions for Gas Detection and Monitoring Applications
2021 Servomex Product Guide Servomex offers a robust selection of gas detection technologies for a variety of industrial processes. The analyzers are hand-built to precise requirements.  Here are 3 of the most requested lines of Servomex gas analysis systems  with links to their full specs and details. Servotough Hazardous Area Reliable g...
Continue reading
  2714 Hits
  0 Comments

SERVOMEX 2021 Gas Guide

SERVOMEX 2021 Gas Guide
 The SERVOMEX 2021 Gas Guide is here to help you find the right solution for your gas analysis application. This comprehensive guide is an introduction to our complete product range of analyzers, systems, service support packages and so much more. With the SERVOMEX 2021 Gas Guide, you'll learn about: Improving your processes A complete specifi...
Continue reading
  1680 Hits
  0 Comments

SERVOMEX 2021 Application Guide

SERVOMEX 2021 Application Guide
Your Guide to Servomex Gas Analysis Applications There are many challenges facing industrial processes, but finding the right gas analysis solution doesn't have to be one of them. Expert Solutions Magazine features comprehensive gas analysis solutions to industrial applications like yours. Servomex delivers scalable gas analysis solutions for hundr...
Continue reading
  2904 Hits
  0 Comments

One Stop Shop, Honeywell Products

One Stop Shop, Honeywell Products
The Honeywell Shop Welcome to the Honeywell Shop. DMS is your one-stop-shop for commercial and industrial-use Honeywell products from gas detection to industrial flame monitoring, gas cloud imaging systems to optical flame detection products. Honeywell offers a robust selection of gas and fire protection technologies for a variety of industrial pro...
Continue reading
  2465 Hits
  0 Comments

Meet the Extreme Challenge of Measuring Gases in Hazardous Environments

Meet the Extreme Challenge of Measuring Gases in Hazardous Environments
 SERVOTOUGH process and combustion analyzers are designed to meet the extreme challenges of measuring gases in hot and hazardous environments and provide exceptional analytical performance. The Servomex analyzers are: Optimized for hazardous area useUse extractive and in-situ analysis techniquesAnalyze common gas measurements for light hydroca...
Continue reading
  2094 Hits
  0 Comments

Measure Gases in Diverse Ranges of Safe Area Applications

Measure Gases in Diverse Ranges of Safe Area Applications
The SERVOPRO range makes Servomex's reliable, stable and accurate gas measurements available to a diverse range of safe area applications. An extensive range of non-depleting Servomex gas sensing technologies – including Paramagnetic, Zirconia, Flame Ionization Detection, Plasma and Gas Chromatography – are integrated into flexible analyzers. These...
Continue reading
  2319 Hits
  0 Comments

SERVOPRO 4900 Multigas

SERVOPRO 4900 Multigas
Designed for Continuous Emissions Monitoring Systems (CEMS) analysis for flue gas, the 4900 Multigas provides up to 4 simultaneous gas stream measurements. SERVOPRO 4900 Multigas combines Servomex's advanced digital sensing technologies with a modern analytical platform for accurate, highly sensitive monitoring of: Nitric oxideSulfur dioxideCarbon ...
Continue reading
  2516 Hits
  0 Comments

SERVOTOUGH FluegasExact 2700 Ideal for High Temperature Processes

SERVOTOUGH FluegasExact 2700 Ideal for High Temperature Processes
The SERVOTOUGH FluegasExact 2700 is an all-in-one solution for combustion control. Its custom-designed sampling system measures both oxygen and combustibles and is ideally suited for high temperature processes. Boasting a long life with low maintenance, the SERVOTOUGH FluegasExact 2700 is tough and reliable and is designed for safe area and Class 1...
Continue reading
  2781 Hits
  0 Comments

Benefits of TDL Over Extractive Measurement

Benefits of TDL Over Extractive Measurement
Monitoring NH3 using extractive sampling is difficult. The sample must be kept above 290oC (554oF) to prevent formation of ABS and sulfuric acid, both of which damage the sampling and analytical equipment. Without direct gas analysis, many parameters will influence the NH3 measurement, including inlet NOx concentration, fuel composition and catalys...
Continue reading
  5339 Hits
  0 Comments

How To Get Ultra-Trace-Level, High-Purity Gas Measurements

How To Get Ultra-Trace-Level, High-Purity Gas Measurements
When your processes need high-purity gas measurements for oxygen and moisture, Servomex DF analyzers deliver industry-leading performance that reaches down to the very lowest ultra-trace levels. Utilizing the exceptional sensing capabilities of Servomex's Coulometric and TDL sensing technologies for the measurement of oxygen and moisture respective...
Continue reading
  2523 Hits
  0 Comments

Provide Ambient Air Monitoring with a NOx Analyzer

Provide Ambient Air Monitoring with a NOx Analyzer
 The SERVOPRO NOx analyzer is ideal for the continuous monitoring of industrial stationary source emissions, especially gas turbines. Using a non-depleting, long-lasting photodiode to detect chemiluminescent light, the analyzer offers a fast response time and is ideal for applications requiring low-level emissions detection of oxides of nitrog...
Continue reading
  2935 Hits
  0 Comments

Real-Time Hydrocarbon Analysis

Real-Time Hydrocarbon Analysis
With heated-oven Flame Ionization Detection (FID) sensing technology and an integral non-methane cutter, the SERVOPRO HFID delivers fast, accurate analysis of total hydrocarbons, methane, and non-methane hydrocarbons, with measurements from parts-per-million to percentage levels. The heated oven keeps the sample gas at 190oC (374oF), preventing hea...
Continue reading
  2606 Hits
  0 Comments