Hamilton

The EasyFerm Plus family of pH sensors is designed to withstand demanding applications in the Pharmaceutical and Chemical industries. All family members have the same reference electrolyte Phermlyte, the same type of diaphragm HP Coatramic but different pH glasses. The standard EasyFerm Plus, with its PHI glass, is directed at the BioPharm and Pharmaceutical industries because the glass has an excellent chemical robustness and provides best results in applications where sterilization either in an autoclave or an SIP is performed frequently. The new versions with the HB glass show a very fast recovery after CIP and SIP cycles leading to a shortened set-up time.

The LEVP (LE = Liquid Earth) versions have a stabilized sensor signal and an extended sensor diagnosis.

Download PDF Brochure

The maintenance free Polilyte Pro and Polyplast Pro sensors are designed for pH measurement in water applications, especially in low conductivity samples, e.g. wastewater, fish farming, ground water, etc.

The Single Pore liquid junction guarantees best measurement results because of direct contact between the sample and the Polisolve electrolyte – clogging is nearly impossible. The Polyplast Pro sensor comes with a robust plastic shaft and glass bulb protection.

Download PDF Brochure

The maintenance free MecoTrode sensor is designed for processes in the chemical industry with extreme pH values. The H glass type membrane glass provides a low alkaline error and stable measurement even at high temperatures.

Three high-performance ceramic diaphragms reduce the effect of flow potential in pipe mounting.

Download PDF Brochure

The InchTrode sensors are designed to measure pH in demanding applications in the paper making as well as in the chemical industries. The Single Pore liquid junction guarantees the best and fast measuring results because of direct contact between the sample and the Polisolve electrolyte.

The InchTrode sensors are easy to install without additional housing and have a robust PEEK shaft.

Download PDF Brochure

The maintenance free Polilyte Plus ORP sensors are designed to withstand demanding applications in chemical and petrochemical industries. Monitoring the ORP value is becoming increasingly important in many applications, especially harsh chemical environments or high alkaline wastewater. Because of its Single Pore diaphragms you will never have liquid junction problems and total breakdowns. The Polilyte Plus ORP sensors demonstrate reliable reproducible measurement accuracy in highly alkaline solutions as well as in samples with low conductivity. Additionally, the Everef-L reference cartridge ensures a long lifetime.

Download PDF Brochure

The EasyFerm Plus ORP sensors are designed to withstand demanding applications in pharmaceutical and chemical industries. It is supplied with a pre- pressurized electrolyte which prevents the diffusion of sample into the sensors. The Everef-F reference cartridge ensures that the Phermlyte reference electrolyte remains free of silver and precipitation. Measuring the ORP value is getting more and more important in the branches mentioned above.

Download PDF Brochure

The Conducell 4UxF sensors are suited for measurements in hygienic applications. All wetted parts are FDA-approved, can be cleaned easily and withstand CIP cleanings and autoclavations. The sensors show a very good linearity over a broad measuring range. They are available with different process connections such as Varivent ®.

The Conducell 4USF with stainless steel electrodes is most common. This sensor is suitable for various applications in biopharma, water or food industry. The newly implemented lengths are perfectly designed for flow cells e.g. in downstream applications.

All plastic materials are compliant with the order EU 10/2011.

Download PDF Brochure

Hamilton’s single-use conductivity monitoring system is comprised of the reusable Arc Module Cond-P SU and a single-use sensor patch Conducell-P SU. The Conducell-P SU is integrated within the single-use container by the container manufacturer.

Unlike other single-use conductivity solutions, Hamilton’s reusable Arc Module enables a compact and cost-effective measurement solution without sacrificing accuracy or precision. A standard measuring loop consists of a sensor element (Conducell-P SU), which is connected directly to the electronic (Arc Module Cond-P SU) to enable disturbance free measurement signals.

Download PDF Brochure

The Conducell 4US 4-pole conductivity sensors are designed for different process connections such as Triclamp or G 1¼“ with various O-ring positions. The sensors show a very good linearity over a broad range of conductivities.

The Conducell 4US 4-pole sensor can easily be cleaned and is suitable for steam sterilization, autoclavation and CIP cleanings.

All plastic materials are compliant with the order EU 10/2011.

Download PDF Brochure

The Conducell UPW 2-pole conductivity sensors are designed for the use in liquids with very low conductivity, i.e. Ultra Pure Water, Pure Water and Water for Injection, particularly in the pharmaceutical and chemical industry.

Conducell UPW sensors are available with different process connections such as TriClamp 1.5”, PG 13.5.

All plastic materials are compliant with the order EU 10/2011.

Download PDF Brochure