Honeywell Gas Detection
Introducing the Honeywell Searchline Excel Plus and Edge. The BEST Open Path IR Hydrocarbon Detector On The Market Just Got MUCH BETTER. A...
Honeywell Gas Detection
Combustible & Toxic Gas Detection
Honeywell is the world’s largest manufacturer of combustible and toxic gas detection products. Point infrared and open path infrared hydrocarbon gas detection, electrocatalytic combustible gas detection, electrochemical cell toxic gas detection, PID VOC monitoring, ultra-low PPM and PPB Chemcassette toxic gas detection and a range of control system solutions all combine to provide the most powerful combustible and toxic gas detection range available.
NEED IT IN A FAST? Detection & Measurement Systems stocks the largest inventory of Honeywell gas and flame detection products and accessories in North America.
Gas Detectors
Searchline Excel Plus and Edge Open Path IR Hydrocarbon Detector
- Unmatched extended operating range up to 1,182 feet
Searchline Excel Plus - 2 m to 120 m (6 ft to 393 ft) Path Length
Searchline Excel Edge - 60 m to 330 m (196 ft to 1082 ft) Path Length - Searchline Excel™ Edge can see through the thickest fog, rain and mist, significantly better than any other Open Path Gas Detector, whether NDIR or Laser-based.
- The simpler and cleaner Searchline Excel Plus/Edge is designed to make every aspect of product installation and commissioning faster and easier.
- Bluetooth®-enabled to allow set-up and interrogation from ground level or where you can sit in the shade using Honeywell Fixed Platform Application on an Android mobile device.
- A new advanced, high-power alignment scope enables simple, robust, one-person alignment. A single alignment scope is used for both the IR Transmitter and IR Receiver.
- High visibility LED HALO ring shows at-a-distance visible instrument status behind the lens of the IR Receiver. Green-Normal, Red-Alarm, Yellow-Fault, Orange-Inhibit and Blue-Bluetooth connected.
- Field replaceable electro-optical modules for the IR Transmitter and IR Receiver eliminates replacement of a complete unit in the field, greatly simplifying and quickening field repairs
Searchpoint Optima Plus
Searchpoint Optima Plus Point Infrared Hydrocarbon Gas Detector
- The world’s largest selling infrared hydrocarbon detector
- Extremely Fast Response to Hydrocarbon Gas Exposure
- Many years of virtually maintenance free operation
- Hazardous Area Certifications for anywhere in the world.
- IP66/IP67 Protection against wet environments
- SIL 2 Certification insures reliability
Searchline Excel
Searchline Excel Open Path Infrared Hydrocarbon Gas Detector - NOW REPLACED by the Searchline Excel Plus and Edge
- Up to 650' of Line of Sight Hydrocarbon Detection Coverage
- Extremely Fast Response to Hydrocarbon Gas Exposure
- Patented "Fog Filter" enhances performance in fog and rain
- Completely unaffected by sunlight or other light sources at your facility
- "Cross-Duct" Version for your HVAC Duct Applications available
- Hazardous Area Certifications for anywhere in the world
XNX Transmitter
XNX Universal Gas Detection Transmitter
- One transmitter for electrocatalytic LEL, electrochemical cell toxic, point IR and open path IR hydrocarbon detection technologies.
- 4-20mA with HART® as Standard Configuration, with options for Alarm and Fault relays, MODBUS® or FOUNDATION® H1 Fieldbus and HART port for handheld HART configurator
- Simple plug-in toxic and electrocatalytic sensors make short work of sensor replacement
- Install as a 3-wire or 4-wire (isolated) transmitter
- SIL 2 Certification insures the highest reliability
- Hazardous Area Certifications for anywhere in the world
Series 3000 MKII
Series 3000 MKII and MKIII Toxic and O2 Gas Detector
- 2-Wire, Loop Powered 4-20 mA toxic gas detection Transmitter
- Available for a Variety of Toxic Gases
- NEMA 7 (MKII) and fully Intrinsically Safe (MKIII) versions available
- Simple, Non-Intuitive Setup and Calibration via Magnet Wand
- Pre-Calibrated Plug-In-Under-Power "Smart" Sensor Cartridges
- UL, ATEX and IECEx hazardous area certifications
SensePoint XCD
SensePoint XCD Combustible and Toxic Gas Detector
- Bright Tri-Color Backlit LCD Display shows status of detector at a glance
- Simple and Non-Intrusive Calibration and Transmitter Configuration
- 4-20 mA and Relay Outputs, provided as standard. Optional Modbus RTU Output
- Easy to replace, Plug-In Electrocatalytic, Electrochemical cell and Infrared Sensors
- A variety of unique and useful field configuration options for customized operation
- Worldwide Hazardous Area Certifications
RAEGuard 2 Photoionization VOC Detector (PID)
- Continuous VOC monitoring in hazardous and non-hazardous area locations
- 4-20mA analogue output, RS-485 Modbus and Relay outputs
- Non-intrusive configuration and calibration via Magnetic-key interface
- Quickly remove and replace sensor lamp without tools and in a hazardous area
- Fast response time with integral sample pump
- Humidity compensation ensures accurate readings, even in humid environments
SPM Flex Toxic Gas Detector
The SPM Flex gas detector, with Chemcassette tape technology, is capable of working as both a fixed or a portable unit for detecting Hydrides, Mineral acids, Oxidizers and Amines
- Visible at a distance. Thanks to a crisp display and a color-coded LED bar
- Relays, 4-20 mA and RS485, RS232, RS422 Serial Outputs Available
- More Than 50 Gas Calibrations Available - Definitive detection with a physical record
- Access to detailed event history.
- Easy maintenance and long-lasting battery
- Integral Aspirating Sample Draw System
Touchpoint Plus Gas Detection Control Panel
Capable, Intuitive and Easy To Use Gas Detection Controller
- Monitor up to 16 Combustible and Toxic Gas Detectors
- Large and Bright Color Touch Screen Display and Status LEDs
- Audible and Visual Alarm and Fault Notification
- Multiple Output Options, Including mA, Relays and Modbus RTU, Modbus TCP and Modbus TCP+WEB
- Integral Alarm Acknowledge/Reset Button
- Easy To Install Wall mounting enclosure
- Class 1, Division 2 Certified
- Powerful Features, Highly Intuitive Programming, User-Friendly and Cost Effective
Touchpoint Pro Gas and Fire Detection Controller
Touchpoint Pro accepts inputs from a wide range of flammable and toxic gas detectors. Touchpoint Pro is compatible with most third party flame detectors, gas detectors and manual call points. Touchpoint Pro offers a comprehensive range of outputs including relays, digital outputs and industry standard protocols like Modbus®
- 4 block simplicity reduces design time
- Distributed I/O reduces amount of cable required
- Clip-on I/O and less cable reduces installation time
- Lower cost vs. traditional card systems
- Pre=loaded sensor catalogue reduces commissioning time
- Common modular design reduces training time
- One-man "Walk Test" using remote web enabled device
- Easy to add extra modules to system as site expands
- 3rd Party SIL 2 Certified
Product Menu
Featured Products
Blackline Safety - Real-Time Personal Safety
The Blackline Safety G7 portable wireless devices are monitored remotely 24/7 via cellular and/or satellite coverage. This allows management...
Servomex
Servotough Laser 3 Plus Combustion
Compact TDL combustion series measures O2, CO and CH4 offering unique features and low cost of ownership
How Can We Help You?
Downloads
DMS Hazardous Gas Detection Reference Guide
Contact DMS for a 34" X 26" printed DMS Hazardous Gas Detection Reference Guide poster