Knowledge & Experience
To Provide The Best Solutions

Flexim

Flexim

The FLUXUS range of flow meter measures the volume and mass flow of liquids and gases non-intrusively through FLEXIM‘s proven clamp-on transit-time correlation technology.

The ultrasonic transducers are simply clamped on to the outside of the pipe and never get in direct contact with the media flowing inside the pipe. With permanent and portable flow meters, FLEXIM's product range is directly driven by customer and industry needs and our focus and dedication is directed towards providing the highest quality equipment with the best support and service possible.

The Flexim range of PIOX process analyzers measure the concentration, density and mass flow rate either non-intrusively by ultrasound of via refractometry. Especially aggressive, corrosive and toxic media are not a challenge for an accurate and reliable real time monitoring with PIOX.

Below is just a sample of the wide array of Flexim Ultrasonic Flow Measurement Product Solutions.  Download a complete catalog HERE

FLUXUS G704.316SE

STAINLESS STEEL HOUSED GAS FLOW METER - FM CLASS I, DIV. 2 APPROVED

  • Installation without process interruption and without production stop
  • The system does not suffer from wear, tear, clogging or corrosion, can‘t be a risk for leaks and will not cause any pressure drops inside the pipe
  • Low installation and operation costs (independent of pipe pressure and size)
  • Stable and reliable measuring results even under difficult conditions through unique adaptive signal processing
  • The gas flow meter is drift free and zero stable providing for accurate readings
  • Versatile electrical inputs and outputs for the optimal adaptation to the individual application needs (e.g. T, p)
  • Ideal solution for the measurement of aggressive, corrosive or toxic gaseous media in hazardous areas - especially Offshore
  • The measurement is completely unaffected by gas density, viscosity and composition as well as dust and humidity
  • Even wet gas up to Liquid Volume Fractions of 5% can be measured
  • Highly reliable and accurate based on the DSP and FLEXIM's signal evaluation algorithms
  • Exhaustive internal database with complete parameter set of a variety of pipe materials and media

 

Download PDF Brochure

FLUXUS G704.316SE

FLUXUS® F/G80X

Non-Intrusive Ultrasonic Clamp-on Flow Measurement of Liquids and Gases For Operation in Hazardous Areas

  • Bi-directional flow measurement of liquids and gases in
  • FM-C Class I, Div. 1/2 and ATEX / IECEx Zone 1 areas
  • Very cost effective:
    • No pipe works
    • No process shut-downs
    • Virtually maintenance-free
  • Matched, paired and wet calibrated flow transducers (traceable certification to national standards)
  • Excellent zero point stability and drift-free
  • Wide turndown ratio
  • Independent of pipe size, material, operating pressure, medium and temperature
  • High tolerance to entrained solids and gases
  • Free of wear, tear and abrasion
  • Not prone to clogging or corrosion
  • No pressure loss or source of potential leaks and fugitive emissions

 

Download PDF Brochure

FLUXUS® F/G80X

Flexim Non-Intrusive Ultrasonic HVAC Flow and BTU Usage

  • Confirm & certify flow rates of new and existing systems:
    • Volume flow meters
    • BTU meters & HVAC applications
    • Our calibration meters are NIST
  • Provide formal reports & data analysis based on NIST-traceable portable reference meter
  • Provide traceable third party metering
  • The use of non-invasive ultrasonic flow meters so you don’t have to shut down any process or systems
  • Measure and capture low velocity flow rates that no other metering technology can measure
  • Over 30+ years industry experience

 

Download PDF Brochure

Flexim Non-Intrusive Ultrasonic HVAC Flow and BTU Usage

FLUXUS® F/G601 and F/G608

Portable ultrasonic clamp-on gas and liquid flow meters

  • For virtually any pipe material and media, regardless of the conductivity and pressure level
  • Wide application range: two pairs of transducers are sufficient to cover the most common pipe diameters in industrial applications
  • The broad transducer range enables flow measurement at pipes sizes from ¼ inch to feet with pipe wall temperatures from -275 °F up to +750 °F and beyond as well as within hazardous areas (FM Class I, Div. 2 certified).
  • Highly reliable measurements even at high solid contents or wet gas
  • Ideal measurement solution for the determination of a building‘s or plant‘s thermal energy consumption and total energy efficiency
  • Energy efficient battery management allowing for more than 17 hrs. of remote measurement

 

Download PDF Brochure

FLUXUS® F/G601 and F/G608

How Can We Help You?

  1. Invalid Input
  2. Invalid Input
  3. Invalid Input
  4. Invalid Input
  5. Invalid Input

Featured Products:

Downloads:

downloads

Download Product Linesheet

DMS Hazardous Gas Detection Reference Guide

Contact DMS for a 34" X 26" printed DMS Hazardous Gas Detection Reference Guide poster